Adding Rubber Inserts

The Expand Lens’ case is made for use with the iPad Air, iPad Air 2. If you are using the iPad Air 2, you will need to adhere the rubber inserts to the inside of your case. You will find the inserts in a plastic bag inside the case’s packaging.

 

There are 4 adhesive inserts in total. To insert them, follow these steps:

 
  • Remove the backing of the insert, revealing the adhesive side.
  • Align the insert with the features of the case, as shown in the diagram below.
  • Press lightly to adhere the inserts into the inside of the case.
expand-case-inserts
  • Help us improve our Support Center. Was this article helpful?
  • Yes   No