Using the Marker

The new C Series Robot looks similar to the Gen2 Robot, but can do a whole lot more!
Which robot do you have? The article you see here applies only to the Swivl Gen2 Robot. Click here for the Swivl C Series Robot article.


  There are five buttons located on the marker. The power button can be found on the side of the marker and powered on by pressing for 3-4 seconds. The record button is located under the power button on the side. A quick tap will start and stop recording when the Swivl base is connected to both the marker and your mobile device. The arrow buttons will navigate notes or slides displayed in the Swivl app. This is a perfect tool to use when displaying a PowerPoint or Keynote presentation for an audience.   
 
The checkmark button has two possible actions that can be changed within the Swivl app. Actions include:
  • Pause tracking – Swivl will temporarily stop following the marker until checkmark is pressed again.
  • 360° turn – Swivl will record a full a full 360° rotation as a single video.
  • Marker

    Pause Tracking Video

     

    360 Video

     
    • Help us improve our Support Center. Was this article helpful?
    • Yes   No